Aluminum oxide is a popular choice among industrial professionals because of its fast cut-rate and long life. This mineral makes a tough, durable abrasive that self-fractures to expose fresh cutting edges, whereas traditional natural abrasives dull more quickly. Due to its fast cut rate, hardness, and strength, it is widely used in grinding applications in addition to sanding and finishing applications.
Aluminum Oxide Quick Change Paint Striper (AO) Grit Size Table Corresponding To Raw Materials
Aluminum Oxide Quick Change Paint Striper (AO) Quick Change Paint Striper Size Table
Aluminum Oxide Quick Change Paint Striper (AO) Specification:
Max. RPM: 7000~10000 RPM
Outer Diameter: 100mm/115mm/125mm/150mm/180mm
Center Hole Diameter: 16mm/22mm
Other Raw Materials: Silicon Carbide (SC)
Aluminum Oxide Quick Change Paint Striper (AO) Materials that can be worked:
Aluminum
Cobalt-based alloys
Other non-ferrous metals
High-temperature-resistant materials
Nickel-based alloys (e. g. Inconel and Hastelloy)
Bronze
Hard non-ferrous metal
Titanium
Titanium alloys
Copper
Soft non-ferrous metal
Brass
Zinc
Stainless steel (INOX)
Grey/nodular cast iron (GG/GJL, GGG/GJS)
Annealed cast iron
Thermoplastics
Elastomers
Fiber-reinforced duroplastics (GRP, CRP)
Hardened, heat-treated steels over 1,200 N/mm2 (over 38 HRC)
Steel, cast steel
Aluminium Oxide Quick Change Paint Striper (AO) Applicable Industries
Applications
Surface work
Roughening
Cleaning
Safety Warning of Aluminium Oxide Quick Change Paint Striper (AO)
Instructions:
Safety Warning of Aluminium Oxide Quick Change Paint Striper (AO)
Please try to choose an operation indoor environment and wear protective guards and goggles.
Never exceed the recommended maximum permitted rotational speed for safety reasons.
In order to have a good stock removal rate, quality of surface, and thermal loading on the workpiece, the best performance would be with a recommended cutting speed of 15-20m/s.
Don't push and increase the pressure during the processing to achieve a finner surface looking, but try to switch to different grit flap wheels.
Safety Warning:
The clamping length between shank and grinders should be more than 15mm.
Never exceed the maximum safe speed when the shank is extra long. Try to consult your sales to check the safety rotating speed before use.
Now the price of remove paint with grinder is reasonable, if you have needs, please leave us a message.
Keying Abrasives is a family-owned company, estabilished in 1997. Keying is focusing on manufacture and supply quality advanced custom abrasives and grinding tools, including various series of abrasive tools, like mounted flap wheel for wood with shaft, unmounted flap wheels, flap discs, non woven grinding and polishing wheels/discs and other abrasive tools, for different grinders and fabracation industry application purpose.
